Drew-technologies CarDAQ-Plus Manual de usuario descargar pdf (Pagina 11)

Connectors and Status Indicators

Front Panel

The front panel of the CarDAQ-Plus holds the USB connector for

connection to a PC, status lights, and the reset button. The 6 status

lights on the front panel of CarDAQ-Plus are useful for troubleshooting

the CarDAQ-Plus connection to a PC.

Figure 1: CarDAQ-Plus with USB

The #4 yellow warning light indicates that the CarDAQ-Plus is

communicating with the vehicle. Do not disconnect anything while the

yellow light is illuminated! Refer to Table 1 for a description of the other

status lights.

Table 1: Status lights on the front panel of CarDAQ-Plus

# Light Description

Power Power (Solid Green)

Ethernet Green indicates a good connection directly to a PC or to an existing

Ethernet network.

USB Green indicates a good USB connection. The PC has identified and

configured CarDAQ-Plus properly.

N/A Available for future expansion.

Vehicle Yellow warns that CarDAQ-Plus is communicating with a vehicle. Blinks

to indicate activity on the vehicle’s network.

Fault Red indicates a momentary network fault or a serious hardware failure.

Please call technical support for assistance.

Rear Panel

Connections to the vehicle, Ethernet, analog inputs, and external

programming voltage are available on the rear panel.

Figure 2: Rear panel with vehicle, analog, and Ethernet sockets

The red external programming socket provides access to the 5-20V

programming voltage. This is used for Mitsubishi, Subaru or any other

vehicle that needs voltage on an additional connector.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Drew-technologies CarDAQ-Plus Manual de usuario Pagina 11